1909 Ford Model T Touring Car - 1/16th
+5
harron68
Geezerman
Mr Hirakawa
dublin boy
RetiredMike
9 posters
Skid's :: Works In Progress :: Road cars
Page 2 of 2
Page 2 of 2 • 1, 2
Re: 1909 Ford Model T Touring Car - 1/16th
Brilliant Mike, very enjoyable build.
GaryDainton- Advanced Member
- Posts : 4433
Join date : 2014-03-06
Age : 56
Location : Bolton UK
Re: 1909 Ford Model T Touring Car - 1/16th
still watching - - - - - cool !
Geezerman- Advanced Member
- Posts : 3651
Join date : 2013-02-24
Age : 88
Location : Gulf coast of central Florids
Re: 1909 Ford Model T Touring Car - 1/16th
Keep it going Mike. Some more nice craftsmanship, that fender looks pretty complicated to cut out. With some fill it will look bang on.
Guest- Guest
Re: 1909 Ford Model T Touring Car - 1/16th
Wonderful work! The leaf springs look great and the fender looks like it will be awesome.
KatsZenJammer- Resident member
- Posts : 2600
Join date : 2016-05-20
Age : 57
Location : Vancouver, BC
Re: 1909 Ford Model T Touring Car - 1/16th
Thanks, all.
I tried using modelling clay for seat material. That's it on the lower portion. The problem is that it shrinks too much as it dries. I tried making a larger than needed piece, intending to cut it down, but letting it dry on a flat surface caused it to dry unevenly and warp very badly. So I'm going with the suggested method of cutting down pieces of balsa wood for the back and sides. The very top will be filled with filler for a single cushion look.
Here, I'm using slabs of balsa as much as possible.
Instructions show a spring simply being attached to the wood dowel. I added the plastic to look more like a beam. I wanted to keep the 'vintage kit' look of the model since it lacks a lot of today's detail.
And she's up on all fours! Wheels are straight, measures evenly, stance is good and it doesn't wobble - Wow!
While going through some of the many little unmarked boxes in my hobby area, I came across some old castmetal headlights, running lights and steering wheel from an old scrapped model.
Thanks again for your comments.
Mike
I tried using modelling clay for seat material. That's it on the lower portion. The problem is that it shrinks too much as it dries. I tried making a larger than needed piece, intending to cut it down, but letting it dry on a flat surface caused it to dry unevenly and warp very badly. So I'm going with the suggested method of cutting down pieces of balsa wood for the back and sides. The very top will be filled with filler for a single cushion look.
Here, I'm using slabs of balsa as much as possible.
Instructions show a spring simply being attached to the wood dowel. I added the plastic to look more like a beam. I wanted to keep the 'vintage kit' look of the model since it lacks a lot of today's detail.
And she's up on all fours! Wheels are straight, measures evenly, stance is good and it doesn't wobble - Wow!
While going through some of the many little unmarked boxes in my hobby area, I came across some old castmetal headlights, running lights and steering wheel from an old scrapped model.
Thanks again for your comments.
Mike
RetiredMike- Advanced Member
- Posts : 3525
Join date : 2013-04-27
Age : 73
Location : Valparaiso, Indiana
Re: 1909 Ford Model T Touring Car - 1/16th
Mike some great stuff for future builds is modelling foam, found in Michelle's. The lowrider crowd uses it for their tucked interiors. Man it looks convincing.
This is really coming together man.
This is really coming together man.
Guest- Guest
Geezerman- Advanced Member
- Posts : 3651
Join date : 2013-02-24
Age : 88
Location : Gulf coast of central Florids
Re: 1909 Ford Model T Touring Car - 1/16th
Coming along really well Mike.
GaryDainton- Advanced Member
- Posts : 4433
Join date : 2014-03-06
Age : 56
Location : Bolton UK
Re: 1909 Ford Model T Touring Car - 1/16th
Curt, thanks for the tip. I'll check that out.
The skirting material they show is a flat piece from the body to the running board. On the actual car they curve downwards, so I bent some up from sheet metal.
I made the front fenders according to the blueprint, but they just don't mate up well to the frame. So I decided to make the fender and running board together and add the inner fender metal afterwards.
Fenders on one side. Just have to finish the inner skirting for the front fender.
And continuing on the seats.
Thanks, all.
Mike
The skirting material they show is a flat piece from the body to the running board. On the actual car they curve downwards, so I bent some up from sheet metal.
I made the front fenders according to the blueprint, but they just don't mate up well to the frame. So I decided to make the fender and running board together and add the inner fender metal afterwards.
Fenders on one side. Just have to finish the inner skirting for the front fender.
And continuing on the seats.
Thanks, all.
Mike
RetiredMike- Advanced Member
- Posts : 3525
Join date : 2013-04-27
Age : 73
Location : Valparaiso, Indiana
Re: 1909 Ford Model T Touring Car - 1/16th
That's shaping up.
Nice work !
Nice work !
Geezerman- Advanced Member
- Posts : 3651
Join date : 2013-02-24
Age : 88
Location : Gulf coast of central Florids
Re: 1909 Ford Model T Touring Car - 1/16th
Beautiful work! The extra effort is really making this stand out.
KatsZenJammer- Resident member
- Posts : 2600
Join date : 2016-05-20
Age : 57
Location : Vancouver, BC
Page 2 of 2 • 1, 2
Similar topics
» 1/16th Ford Model A (Police Sergeant's Car)
» Model T Touring, 1/25 Custom, Revell
» 1/16th CHP Model A Police Sergeants Car.
» Monogram '31 Ford Model A
» Ford Model A Hotrod
» Model T Touring, 1/25 Custom, Revell
» 1/16th CHP Model A Police Sergeants Car.
» Monogram '31 Ford Model A
» Ford Model A Hotrod
Skid's :: Works In Progress :: Road cars
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|