Universal Carrier MkII (Canadian Markings)
4 posters
Skid's :: Finished Works :: Military
Page 1 of 1
Universal Carrier MkII (Canadian Markings)
Got this one finished to-day.
Some of the stowage and ammo boxes are Tamiya kit issue, and some by Accurate Armour.
The kit does not provide aerials and the holes in the aerial bases were about 1mm dia....... way to big to make aerials from styrene. So I drilled two short pieces of 1mm styrene rod, with a .5mm drill and inserted them in the aerial bases. Then I use some .5mm copper wire for the aerials.
Now it needs to be set in the dio with my Quad Tractor and 25 Pounder.
Some of the stowage and ammo boxes are Tamiya kit issue, and some by Accurate Armour.
The kit does not provide aerials and the holes in the aerial bases were about 1mm dia....... way to big to make aerials from styrene. So I drilled two short pieces of 1mm styrene rod, with a .5mm drill and inserted them in the aerial bases. Then I use some .5mm copper wire for the aerials.
Now it needs to be set in the dio with my Quad Tractor and 25 Pounder.
Last edited by Skid on Fri 16 Dec 2016, 10:07 am; edited 2 times in total
_________________
Al.
Constructive criticism is always welcome.
“Success always demands a greater effort.” Winston Churchill
"Success is failure turned inside out" Unknown
Re: Universal Carrier MkII (Canadian Markings)
I know very little about military models, but that looks very nice Al.
dublin boy- Moderator
- Posts : 3862
Join date : 2013-02-27
Re: Universal Carrier MkII (Canadian Markings)
That is one cracker of a build Al, the amount of detailing is very impressive.
The main gun looks to be mounted upside down, .
The main gun looks to be mounted upside down, .
Guest- Guest
Re: Universal Carrier MkII (Canadian Markings)
It's an Australian gun Curt. lol
dublin boy- Moderator
- Posts : 3862
Join date : 2013-02-27
Re: Universal Carrier MkII (Canadian Markings)
Beautifully done! The detailing is wonderful
KatsZenJammer- Resident member
- Posts : 2600
Join date : 2016-05-20
Age : 57
Location : Vancouver, BC
Re: Universal Carrier MkII (Canadian Markings)
Brilliant Al, the attention to detail really shines through, look forward to seeing it with the gun and tractor.
GaryDainton- Advanced Member
- Posts : 4433
Join date : 2014-03-06
Age : 56
Location : Bolton UK
Re: Universal Carrier MkII (Canadian Markings)
Thanks guys.
_________________
Al.
Constructive criticism is always welcome.
“Success always demands a greater effort.” Winston Churchill
"Success is failure turned inside out" Unknown
Similar topics
» Morris 25 pdr field gun and quad gun tractor with Canadian markings
» Universal Carrier, Tamiya 1/35
» Universal Carrier, Tamiya 1/35, Finished!
» Universal Carrier (North Africa Campaign)
» M21 Mortar Motor Carrier 1:35
» Universal Carrier, Tamiya 1/35
» Universal Carrier, Tamiya 1/35, Finished!
» Universal Carrier (North Africa Campaign)
» M21 Mortar Motor Carrier 1:35
Skid's :: Finished Works :: Military
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|