Skid's
Would you like to react to this message? Create an account in a few clicks or log in to continue.

..."around the corner..." Ver. 2

5 posters

Go down

..."around the corner..." Ver. 2 Empty ..."around the corner..." Ver. 2

Post by tiking Thu 24 Nov 2016, 10:03 am

This diorama is nothing new. That's because it is a smaller version of the first diorama I built some years ago, which I dismantled because of unsatisfactory reasons. But, I wanted to do a smaller version of the previous one, but was not sure how I wanted it. So here is that same diorama with exception of the US figures. I wanted the attention to be on the opposite side.

I think I am satisfied with this version, although, I am sure there will be others who preferred the latter diorama to this. But no worries. To each, his own. BTW, I still have not improved on my figure painting as the figures have been left the same as on the previous diorama. Simply have not enough time to fully concentrate on that. So, I only, repainted certain parts of the figures and weathered them a little.

I was hesitant in showing this diorama due to the figures not being up to standard. But I have been busy with other Sci-FI projects lately. Anyhow, I hope you all like this version 2, regardless of the first. Thanks for your support and pepping me on my journey towards improvement. Small note. I had done more weathering after these photos were taken on the building.


..."around the corner..." Ver. 2 2v2uKF91WxAWPEi
..."around the corner..." Ver. 2 2v2uKF9wqxAWPEi
..."around the corner..." Ver. 2 2v2uKF9fFxAWPEi
..."around the corner..." Ver. 2 2v2uKF9AdxAWPEi
..."around the corner..." Ver. 2 2v2uKF9BCxAWPEi
..."around the corner..." Ver. 2 2v2uKF9tgxAWPEi
..."around the corner..." Ver. 2 2v2uKF9YWxAWPEi
..."around the corner..." Ver. 2 2v2uKF9RnxAWPEi
..."around the corner..." Ver. 2 2v2uKF9PFxAWPEi
..."around the corner..." Ver. 2 2v2uKF9DLxAWPEi
..."around the corner..." Ver. 2 2v2uKF9mWxAWPEi
..."around the corner..." Ver. 2 2v2uKF9VqxAWPEi
..."around the corner..." Ver. 2 2v2uKF9CdxAWPEi


Last edited by tiking on Wed 13 Dec 2017, 1:09 pm; edited 1 time in total

tiking
New Member
New Member

Posts : 137
Join date : 2016-06-22

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by Mr Hirakawa Thu 24 Nov 2016, 10:29 am

..."around the corner..." Ver. 2 1705482731
Mr Hirakawa
Mr Hirakawa
Resident member
Resident member

Posts : 1521
Join date : 2015-11-11
Age : 52

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by tiking Thu 24 Nov 2016, 10:32 am

Thanks.

tiking
New Member
New Member

Posts : 137
Join date : 2016-06-22

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by GaryDainton Thu 24 Nov 2016, 12:03 pm

Stunningly good Charles.
GaryDainton
GaryDainton
Advanced Member
Advanced Member

Posts : 4433
Join date : 2014-03-06
Age : 56
Location : Bolton UK

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by tiking Thu 24 Nov 2016, 2:21 pm

Much appreciated.

tiking
New Member
New Member

Posts : 137
Join date : 2016-06-22

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by Guest Thu 24 Nov 2016, 4:56 pm

..."around the corner..." Ver. 2 3887228019 ..."around the corner..." Ver. 2 524092055 ..."around the corner..." Ver. 2 3887228019 A true winner.

Guest
Guest


Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by tiking Thu 24 Nov 2016, 4:58 pm

Thank you.

tiking
New Member
New Member

Posts : 137
Join date : 2016-06-22

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by KatsZenJammer Sat 26 Nov 2016, 9:05 pm

Amazing work!
KatsZenJammer
KatsZenJammer
Resident member
Resident member

Posts : 2600
Join date : 2016-05-20
Age : 57
Location : Vancouver, BC

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by tiking Sat 26 Nov 2016, 9:11 pm

Thanks.

tiking
New Member
New Member

Posts : 137
Join date : 2016-06-22

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by harron68 Mon 28 Nov 2016, 1:42 pm

Get outta here! You need to have a place to show off these inspiring scale visions of reality. They are that good!

harron68
Advanced Member
Advanced Member

Posts : 3616
Join date : 2013-02-28
Age : 73
Location : MIDWEST

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by tiking Mon 28 Nov 2016, 3:32 pm

harron68 wrote:Get outta here!  You need to have a place to show off these inspiring scale visions of reality.  They are that good!

Appreciate the comment. Glad you like it.

tiking
New Member
New Member

Posts : 137
Join date : 2016-06-22

Back to top Go down

..."around the corner..." Ver. 2 Empty Re: ..."around the corner..." Ver. 2

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum